LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> LeSabre Custom >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L V6 VIN L & 3.8L Supercharged V6 VIN 1 >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Disconnect negative battery cable. Remove engine. See ENGINE  under REMOVAL & INSTALLATION.
  2. Remove intake manifold. See INTAKE MANIFOLD  under REMOVAL & INSTALLATION. Remove rocker arms and push rods. See ROCKER ARMS & PUSH RODS  under REMOVAL & INSTALLATION.
  3. Remove valve lifters. Remove timing chain and sprockets. See TIMING CHAIN & SPROCKETS  under REMOVAL & INSTALLATION. Remove camshaft thrust plate and camshaft. Using Remover/Installer (J-33049), remove camshaft bearings (if necessary).
scientia non olet · About LEMON Manuals