LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1989 >> Electra Estate Wagon >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" V6 - VIN [C] >> Removal & Installation >> Front Crankshaft Seal >> Installation

Front Crankshaft Seal: Installation

  1. Using Seal Installer (J-35354) and crankshaft balancer bolt, install seal. Remove seal installer.
  2. Coat outside surface of crankshaft balancer and seal with oil prior to installation. To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals