LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1989 >> Electra Estate Wagon >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" V6 - VIN [C] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold. See INTAKE MANIFOLD in this article. Remove exhaust manifold. See EXHAUST MANIFOLD in this article.
  2. On front cylinder head applications, disconnect spark plug wires. Remove alternator and bracket with ignition coil attached. Remove A/C compressor bracket bolt.
  3. On rear cylinder head applications, disconnect spark plug wires. Remove power steering pump with hoses attached and lay aside. Remove belt tensioner assembly and fuel line heat shield (if equipped).
  4. Remove rocker arms, push rods and guide plates. See ROCKER ARMS & PUSH RODS under REMOVAL & INSTALLATION in this article. Remove cylinder head bolts, cylinder head and gasket.
scientia non olet · About LEMON Manuals