LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1989 >> Electra Estate Wagon >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" V6 - VIN [C] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Install camshaft bearings (if removed). Ensure oil holes are aligned. Apply Sealant (1052914) to rear camshaft plug prior to installation. Lubricate camshaft bearings and camshaft lobes with GM Lubricant (1052365) prior to installation. Install camshaft.
  2. To install remaining components, reverse removal procedure. Ensure components are installed in original location and all timing marks are aligned.
scientia non olet · About LEMON Manuals