Printed Circuit

Removal & Installation (Century)

Disconnect battery ground. Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL and INSTALLATION in this article. Remove vehicle speed sensor. See VEHICLE SPEED SENSOR under REMOVAL and INSTALLATION in this article. Remove bulb sockets, and printed circuit retaining screws. Remove printed circuit. To install, reverse removal procedure.

Removal & Installation (Electra & LeSabre)

Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL and INSTALLATION in this article. Remove cluster housing. Remove bulb and socket assemblies. Remove clips holding printed circuit to back of housing. Remove printed circuit. To install, reverse removal procedure.

Removal & Installation (Skyhawk & Skylark)

Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL and INSTALLATION in this article. Note bulb location and remove all bulbs from rear of cluster. Remove all nuts retaining printed circuit to cluster. Remove printed circuit. To install, reverse removal procedure.