Bleeding Front Brakes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1988 Cadillac Fleetwood, 1988 Cadillac DeVille, 1987 Cadillac Fleetwood, 1987 Cadillac DeVille, and 1986 Cadillac Fleetwood. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use only Dot 3 brake fluid. Use of Dot 5 silicone fluid is NOT recommended. Internal damage to pump components may result.
The front brakes can be bled in conventional manner or by pressure bleeding. The manufacturer recommends pressure bleeding front brakes with a minimum of 20 psi (1.4 kg/cm2 ).