Rear Wheel Cylinder: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1990 Pontiac Bonneville, 1990 Oldsmobile Ninety-Eight, 1990 Oldsmobile Eighty-Eight, 1990 Cadillac Fleetwood, and 1990 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
To install, replace wheel cylinder in position and install screws. Tighten screws to 106 in. lbs. (12 N.m). Connect inlet tube line.