LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1987 >> Electra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Disc & Drum) >> Removal & Installation >> Brake Booster >> Removal

Brake Booster: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1990 Pontiac Bonneville, 1990 Oldsmobile Ninety-Eight, 1990 Oldsmobile Eighty-Eight, 1990 Cadillac Fleetwood, and 1990 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Without disconnecting hydraulic lines, remove master cylinder from power unit and position to one side. On Delco-Moraine models equipped with pipe distribution and switch mounting bolt, remove bolt before moving master cylinder away from power unit.
    CAUTION: Do not bend or kink hydraulic lines.
  2. Disconnect vacuum hose from check valve on front of power unit. Disconnect push rod from brake pedal.
    CAUTION: Do not force push rod to the side when disconnecting.
  3. Remove nuts mounting power unit to firewall and remove power unit.
scientia non olet · About LEMON Manuals