LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1987 >> Electra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Anti-Lock Brake System (Fwd)) >> Bleeding Brake System >> Bleeding Front Brakes With Pressure Bleeder

Bleeding Front Brakes With Pressure Bleeder

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1990 Pontiac Bonneville, 1990 Oldsmobile Ninety-Eight, 1990 Oldsmobile Eighty-Eight, 1990 Cadillac Fleetwood, and 1990 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bleed front brakes only when rear brakes have been bled first. Remove reservoir cap. Attach Bleeder Adapter (J-35798) to reservoir. Attach bleeding equipment and pressurize system to 20 psi (1.4 kg/cm2 ).
  2. Attach a bleeder hose to one front bleeder valve and submerge other end of hose in a container of clean brake fluid. Open bleeder valve.
  3. Allow fluid to flow until no air is seen coming out end of hose. Close bleeder valve. Repeat procedure for other front brake. Fill reservoir to maximum level with accumulator fully charged.
scientia non olet · About LEMON Manuals