LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1979 >> Skyhawk Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Switches, Gauges & Instrument Panels >> Removal & Installation >> Instrument Panel Pad >> Removal (Skyhawk & Starfire)

Removal (Skyhawk & Starfire)

  1. By removing 11 screws from around edge of pad, it is possible to remove pad without removing instrument cluster. Make sure A/C ducts are disconnected.
  2. Disengage clips at rear of pad by prying up on pad. Remove pad.
scientia non olet · About LEMON Manuals