Replacing turbocharger
- Loosen screws (1)
.
- Loosen screws (1) .
- Remove the lines (1) .
- Replace the right turbocharger.
Parts: Turbocharger
- Position the lines (1) on the turbocharger.
- Replace sealing rings.
Parts: Sealing ring
- Position screws (1) with sealing rings on the lines.
- Tighten down screws (1) .
TIGHTENING TORQUES SPECIFICATION
| Coolant lines on turbocharger | ||
|---|---|---|
| Screw M14x1.5 | Tightening torque | 15 Nm |
| Angle of rotation | 75° | |