Installing the front section of the front wheel arch cover
- Replacement:
Position the brake ventilation duct (2) .
Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATION
| Brake ventilation duct on front wheel arch cover front section | ||
|---|---|---|
| Hexagon bolt for thermoplastic | Tightening torque | 3 Nm |
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide in front section (1) of the wheel arch cover at the front together with the brake ventilation duct (2) .
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATION
| Front wheel arch cover front section on body | ||
|---|---|---|
| Hexagon bolt for thermoplastic | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .