Removing Damaged Self-Tapping Screws

Precondition

Sealant has been removed from the screw head.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Position the chisel (1) on the side of the screw head.
Loosen the screw (2) by hitting it with a hammer.
Repeat the procedure until the screw (2) has turned by approx. 90°.

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the screw (1) using pliers (2) .

Courtesy of BMW OF NORTH AMERICA, INC.