Removing the wiring harness for convertible top latch

Precondition 

• Battery charger connected.

Preliminary work 

• Refer to REMOVING CONVERTIBLE TOP BOW, FRONT .

• Mark the positions of the screws (1).
• Release screws (1).
• Slightly fold the convertible top drive (2) down.
• Unlock plug connection (3) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the expanding rivet (1) on the left and right.
• Remove the Hall effect sensors (2).
• Unlock plug connection (3) and disconnect.
• Unclip the wiring harness (4) at all the holders and guide it out.

Courtesy of BMW OF NORTH AMERICA, INC.