Installing mid-range speaker at the rear of the side trim panel
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Insert the mid-range speaker (2) into the side panel (3) and position it correctly.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Loudspeaker on the door/trim panel Screw tightening torque 2 Nm - If necessary, position the acoustic fleece correctly.
Follow-up work
- Refer to INSTALLING THE SPEAKER COVER ON THE SIDE TRIM PANEL .
- Refer to INSTALLING THE ARMREST ON THE SIDE TRIM PANEL .
- Refer to INSTALLING THE SEAT-BELT EXTENDER .
- Refer to INSTALLING THE SOUND INSULATION ON THE SIDE TRIM PANEL .
- Refer to INSTALLING REAR TRIM PANEL .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING SEAT BELT EXTENDER HAND .