Install B-Pillar With Reinforcement
- Pre-clean the bonding surfaces (1) on the vehicle and on the new part with cleaning agent R2.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - Clean bonding surfaces (1) on vehicle and on new part with cleaning agent R1.CONSUMABLE SPECIFICATION
Cleaning agent R1 100 ml, Bottle 83192211217 - Apply adhesive K1 to the bonding surfaces (1).ADHESIVE SPECIFICATION
Body adhesive K1 195 ml 83190413015 NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of cavity sealing (expanded) - Apply sealant D1 to cavity sealing (2).CONSUMABLE SPECIFICATION
Sealant D1 (seam sealing) 310 ml 83422409985 - Install new part and weld in areas (1) as per the new part preparation process.
In the process, avoid an excessively high heat input to the adjacent adhesive area (2) and cavity sealing (3).
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of a cavity sealing (not expanding) - Apply sealant D1 to the new cavity sealings (1). Install cavity sealings (1).