If installed: Remounting the driver camera system (DCS)

Removing the driver camera system (DCS) 

• Release the screws (1)  on the Driver Camera System (DCS) (2)  .
• Feed out and remove the Driver Camera System (DCS) (2)  upwards at the guides (3)  of the instrument cluster (4)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the driver camera system (DCS) 

• Feed the Driver Camera System (DCS) (2)  into the guides (3)  of the instrument cluster (4)  from the top.
• Tighten the screws (1)  on the Driver Camera System (DCS) (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.