Checking the abrasion protection foil for tail light on the rear side panel

Check 

• The abrasion protection foil (1) must be properly adhered to the side panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The abrasion protection foil (1) is located on the tail light.

Measure

• Stick the abrasion protection foil (1) on the side panel (2) correctly and remove the abrasion protection foil (1) from the tail light.

Result 

» The abrasion protection foil (1) is not  located on the tail light.

Measure

• Stick the abrasion protection foil (1) on the side panel (2) correctly.

Adhering the abrasion protection foil for tail light on the side panel 

• Position the abrasion protection foil on the side panel (2) as indicated by the marker lines.

  Parts: Abrasion protection film 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean the adhesive area.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Adhere the abrasion protection foil (1) with dimension A = 5.0 mm to the side panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.