Remove door sill cover strip, interior right
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the inner door sill cover strip
NOTE:
RISK OF DAMAGE
Bending of plastic components.
Application of too much force can lead to bending of plastic components.
Bending of plastic components.
Application of too much force can lead to bending of plastic components.
- Place special tool directly beside the mounting clip.
- Continue unclipping the part without using the tool if possible.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Release door sill cover strip (1) with the clips (2) from the front, starting with a suitable special tool from the set of special tools 0 493 752 (00 9 329).
- Feed out the door sill cover strip (1) under the rear side trim panel (3) and remove it.
- If necessary, remove clips (1) and attach to door sill cover strip.