Attaching the bracket of the front transmission oil line

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following step(s) must be performed if the specified component(s) is/are installed.

Position the bracket of the transmission oil line (1).
Tighten down screw (2).

TIGHTENING TORQUES SPECIFICATION

Front transmission oil cooler line holder
M6x18	tightening torque	12 Nm

Courtesy of BMW OF NORTH AMERICA, INC.