Removing the seal for the windshield panel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Precondition
- Battery charger connected.
CAUTION:
Folding up of convertible top through loss of pressure in hydraulic cylinders.
Injury hazard! Injury hazard by trapping!
Injury hazard! Injury hazard by trapping!
- When carrying out all repair work, secure soft top and soft top compartment lid with a suitable support tool against collapsing. Ensure soft top is supported in the middle.
- Bring the convertible top (1) in the half opened position.
Secure the convertible top (1) from collapsing by using the support 2 452 010 if necessary.
NOTE: Perform the steps on the left and right side. - Mark the positions of the screws (1).
- Note down the number and position of the washers (3).
- Loosen screws (1).
- Remove the seal carrier (2) of the seal for the windshield panel.
- Loosen screws (1).
- Remove the seal (2) for the windshield panel.
- In case of replacement only:
Detach the seal (1) for the windshield panel from the insert (2) made of metal.