Removing the convertible top latch
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Precondition
- Battery charger connected.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING CONVERTIBLE TOP BOW, FRONT .
- Release the blind rivet (1).
- Release the Hall effect sensor (2) at the cable brackets (3) and remove it.
- Slightly raise the retaining clip (4) and unclip the ball head (5).
- Release nuts (1).
- Remove the convertible top latch (2).