Removing the tie rod end

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Perform wheel alignment after installation.

NOTE: Description is for left component only. Procedure on the right side is identical.

Preliminary work

Refer to REMOVING FRONT LEFT OR RIGHT WHEEL .

Release nut (1). If necessary, counter support at the Torx socket.
Release tie rod end (2) from the swivel bearing (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Determine dimension (A) to simplify the following toe adjustment on the front axle.
Slacken screw (1).
Unscrew tie rod end.

If necessary, hold the track rod with an open-end spanner for counter support.

Courtesy of BMW OF NORTH AMERICA, INC.