Install the transmission oil pan (GA8HP76Z)
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
The transmission oil pan and seal must be replaced each time after loosening.
The transmission oil pan and seal must be replaced each time after loosening.
- Replace the oil filter (1).
Parts: Oil filter
- Insert the oil filter (1) into the transmission connection (2) and align it parallel to the transmission side.
- Clean the contact surface of the transmission oil pan on the transmission.
- Replace screws (1) to (13).
Parts: Screws
- Position the transmission oil pan.
- Hand-tighten the bolts.
- Tighten the screws in the sequence (1) to (13).
TIGHTENING TORQUE SPECIFICATIONS
| Transmission oil pan | ||
| M6 Replace screws. | tightening torque | 10 Nm |
- If necessary, tighten the oil drain plug (1).
TIGHTENING TORQUE SPECIFICATIONS
| Oil drain plug | ||
| M18 Replace screw. | tightening torque | 8 Nm |