Installing the cover on the rear window
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Note the mark (A) for the cover (1) on the rear window.
- Move lever (1) in the arrow direction and use special tool 0 496 529 (51 3 320)
to open.
- Detach protective film (2) in stages from adhesive tape.
- Insert cover (1) into the guides (3).
- Place the special tool with the pressure rollers (1) up against the window edge.
- Align the cover on the outer edge of the rear window.
- Put the cover on and visually check to make sure it is positioned correctly.
- Reposition the lever (1) in arrow direction and close the special tool with it.
- Make sure the cover (3) is positioned correctly in the guide pulleys (2).
- Continue to detach protective film (1) in stages from adhesive tape.
- Use the handwheel to pull the special tool in the arrow direction over the entire upper edge of the window glass.