Installing the right hood lock

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Attach the cable (3).
Feed in the hood lock.
Replace screws (2).
Parts: Screws

Tighten down screws (2).

TIGHTENING TORQUE SPECIFICATIONS

Bonnet lock
screw Replace screws	Tightening torque	8 Nm
screw Replace screws	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and lock.

Follow-up work

Refer to ONLY ON VEHICLES WITH ACTIVE PEDESTRIAN PROTECTION .
Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT ON THE TOP RIGHT .