Replacement: Remounting the components on the support

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

Loosen screw (1) .
Remount fanfare horn (2) .

Tighten down screw (1) ,

TIGHTENING TORQUE SPECIFICATIONS

Fanfare horn to support for bumper cover
M6x20 screw	Tightening torque	8.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (arrows) and remove holders (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Position holders (arrows) and tighten screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Holder to support
M6x20	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.