Installing the oil pressure switch
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Guide in and install oil pressure switch (1).
- Tighten the oil pressure switch (1) with the special tool 0 496 106 (11 8 720) .
TIGHTENING TORQUE SPECIFICATIONS
| Oil pressure switch to crankcase | ||
|---|---|---|
| M12X1.5 | tightening torque | 16.5 Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING THE STIFFENING PLATE .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT UNDERSHIELD .
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .
- Refer to INSTALLING THE FRONT SPOILER .
- Refer to CHECKING ENGINE OIL LEVEL .