Prepare for the installation of the hydraulic unit
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Maintain conditions of absolute
Maintain conditions of absolute
- Check the retaining lugs of the holding clip (1) in the marked area (2) for damage and replace the holding clip where required.
- Replace the seal (1) on the hydraulic unit.
Parts: Seal
- Thoroughly clean the sealing surfaces on the hydraulic unit and on the cowl.