Tightening the screw connection to the shock absorber and the wheel carrier
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Slacken the nut (1)
by a turn and tighten it. Provide counter support to screw (2)
in the process.TIGHTENING TORQUE SPECIFICATIONS
Rear shock absorber to the camber control arm M12
Replace screw and nut.
Tighten in the NORMAL POSITION .
Tightening via nut.Tightening torque 100 Nm Angle of rotation 90° - Slacken screw (1) by a turn and tighten it.
TIGHTENING TORQUE SPECIFICATIONS
| Front lower wishbone to wheel carrier | ||
| M12 Replace screw. Tighten in NORMAL POSITION . |
Tightening torque | 100 Nm |