Tightening the screw connection of the left and right camber link on the wheel carrier
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the left and right side.
Tightening the screw connection of the camber link to the wheel carrier
- Slacken the nut (1) by a turn and tighten it. In doing so, counter support at the eccentric screw (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Camber control arm to wheel carrier | ||
| M14 Replace eccentric screw, eccentric washer and nut. |
Tightening torque | 165 Nm |