Loosening the tie rod on the left and right from the swivel bearing
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Loosening the tie rod from the swivel bearing
- Release nut (1)
. If necessary, counter support at the Torx socket.
- Loosen the tie rod (2)
from the swivel bearing (3)
.
 Courtesy of BMW OF NORTH AMERICA, INC.
|