Observing the installation position of the rubber mount towards the rear axle support
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Observe the installation position of the rubber mount (1)
in the rear axle support.
The notch of the internal bore of the rubber mount (1) must point vertically upwards. A maximum deviation of ± 7° is permitted.
The arrow on the rubber mount is pointing upwards.
- If necessary, draw a mark on the outer area of the rubber mount to check the position of the rubber mount (1) during the installation procedure.