Installing the rear ride height sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position ride height sensor (2) on holder.
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Ride height sensor to holder M5 tightening torque 5 Nm - Position jointed rod on the ride height sensor lever.
- Tighten nut (2).TIGHTENING TORQUE SPECIFICATIONS
Jointed rod to ride height sensor M6 Tightening torque 8 Nm - Connect the connector (1) on the ride height sensor.
Follow-up work
- Refer to INSTALLING THE COVER OF THE CAMBER CONTROL ARM .
- Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .
- Refer to ADJUSTING HEADLIGHTS .