Installing the rear aperture trim (M CFRP bucket seat)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

Check

Check all detents on the rear aperture trim (1) for damage.

G15017319

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» A detent is damaged.

Measure

Replace the rear aperture trim.

Correctly position the rear aperture trim (1) in the marked area in the backrest frame (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully clip in the rear aperture trim (1) in the marked area.

G15017311

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE FRONT APERTURE TRIM (M CFRP BUCKET SEAT) .
Refer to REMOVING THE EMBLEM FROM THE BACKREST OF THE FRONT SEAT (M CFRP BUCKET SEAT) .
Refer to INSTALLING THE INSERTING FOR THE HEAD RESTRAINT (M CFRP BUCKET SEAT) .