Installing the catalytic converter near engine, bottom at bank 2

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot exhaust system .
Risk of burning!

Any work must exclusively be carried out with an exhaust system that has cooled down.

Replace gasket (1).

Parts: Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Position the catalytic converter at the bottom of cylinder bank 2 (2).
Replace nuts (1).

Parts: Nuts

Tighten nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Firewall catalytic converter to catalytic converter near engine
Nut M8 Replace nuts.	Tightening torque Tightening torque	17 Nm 28 Nm

Follow-up work

Refer to CONNECTING THE EXHAUST SYSTEM .
Refer to INSTALLING THE STIFFENING PLATE .
Refer to INSTALLING FRONT UNDERBODY PROTECTION .