Installing the system battery
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the system battery (4).
- Correctly position the battery carrier with the screw (2).
- Tighten the battery carrier with the screw (2).
TIGHTENING TORQUES SPECIFICATION
| Battery carrier to body | ||
|---|---|---|
| M8 screw | Tightening torque | 10 Nm |
- Position in the positive battery terminal on the positive battery pole.
- Tighten the nut on the positive battery terminal.
TIGHTENING TORQUES SPECIFICATION
| Positive battery terminal to battery | ||
|---|---|---|
| Nut | tightening torque | 5 Nm |
- Close positive terminal cover (1).
- Position vent hose (3).
- Position the luggage compartment antenna (1) on the cargo area floor (2) and clip it in.
- Position the battery rollover protection bracket (4).
- Tighten down screw (3).
TIGHTENING TORQUES SPECIFICATION
| Battery rollover protection bracket to luggage compartment floor | ||
|---|---|---|
| Nut M6 | Tightening torque | 8 Nm |
- Tighten nut (2).
TIGHTENING TORQUES SPECIFICATION
| Battery rollover protection bracket to luggage compartment floor | ||
|---|---|---|
| Nut M6 | Tightening torque | 8 Nm |
- Connect connectors (1) and lock.
Follow-up work
- Refer to CHECKING THE VENTING HOLES OF THE BATTERY .
- Refer to CONNECTING BATTERY GROUND LEAD .
- Refer to REGISTER BATTERY CHANGE .