Install the tie rod
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
To avoid damage to the steering shaft and its bearing, the rack must be positioned in the steering gear as far as possible.
To avoid damage to the steering shaft and its bearing, the rack must be positioned in the steering gear as far as possible.
- Screw on and tighten the tie rod to the steering shaft with the special tool 0 496 483 (32 3 220) .
TIGHTENING TORQUE SPECIFICATIONS
| Tie rod to steering box | ||
| Tightening torque | 105 Nm | |
Follow-up work
- Refer to INSTALLING THE STEERING GEAR BELLOWS .
- Refer to INSTALLING TIE ROD END .
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .
- Refer to MOUNTING THE WHEEL .
- Refer to PERFORMING CHASSIS ALIGNMENT CHECK .