Brake test on the front axle on the brake test stand (all-wheel drive)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Only brake dynamometers may be used with a testing speed between 3 km/h and 6 km/h.
Only brake dynamometers may be used with a testing speed between 3 km/h and 6 km/h.
Preliminary work
- Refer to PREPARING THE BRAKE TEST .
- Drive the front wheels of the vehicle onto the brake test stand.
- Position the selector lever in selector lever position (N) (neutral).
- Run engine at idle speed.
The brake test stand starts automatically.
- Press brake pedal.
- Read the maximum brake forces on the left and right.