Replacing the trim panel for the rear shelf
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The description is provided only at one component. The procedure is the same for all other components.
- Release the locks (1) and guide out the cover (2).
- Replace the trim panel for the rear shelf.
Parts: Trim panel for the rear shelf
- Clip the cover (2) into the trim panel for the rear shelf.
- Release the plastic nut (1) and remove the belt holder (2).
- Insert the belt holder (2) into the trim panel for the rear shelf and fasten it with the plastic nut (1).
- Release the lock (1) of the speaker cover (2) and push the speaker cover (2) out of the trim panel for the rear shelf.
- Loosen screws (1).
- Remove the mid-range speaker and disconnect the plug connection.
- Loosen screws (1).
- Unlock plug connection and disconnect.
- Remove the tweeter (2).
- Insert the tweeter (2) into the trim panel for the rear shelf.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Speaker to rear shelf/support/head restraint Screw Tightening torque 1.8 Nm - Connect connectors and lock.
- Insert the mid-range speaker.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Speaker to rear shelf/support/head restraint Screw Tightening torque 1.8 Nm - Position the speaker cover (2) correctly and snap it into the trim panel for the rear shelf.
- Properly engage the detent (1).