Installing the LED module on the decorative strip at right

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
The LED module must be readdressed after replacement.
Addressing can only be carried out with the diagnosis system.
If a swap of LED modules was carried out as part of the troubleshooting, this swap should be reversed prior to automatic addressing.

NOTE: The description is provided only at one component. The procedure is the same for all other components.

Clip LED module (2) into fiber-optic conductor.
Clip LED module (2) into the detent (3).
If necessary, clip the fiber-optic conductor into the holder.
Connect connector (1) to LED module (2).

Courtesy of BMW OF NORTH AMERICA, INC.