Replacing the rear bumper cover
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
Preliminary work
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to PARTIALLY REMOVING LEFT AND RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING THE TRIM FROM THE LEFT AND RIGHT WATER CHANNELS .
- Refer to REMOVING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
- Refer to REMOVING REAR BUMPER PANEL .
- Refer to REMOVING ULTRASONIC SENSORS .
- Refer to REMOVING THE TRIM FROM THE BUMPER COVER ON THE LEFT AND RIGHT .
- Refer to REMOVING THE REAR DIFFUSER .
- Remove the wiring harness (1).
- Replace the bumper cover (2).
Parts: Bumper cover
- Install the wiring harness (1).
Follow-up work
- Refer to INSTALLING REAR DIFFUSER .
- Refer to INSTALLING THE TRIM ON THE LEFT AND RIGHT BUMPER COVER .
- Refer to INSTALLING ULTRASONIC SENSORS .
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
- Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (PARTIALLY REMOVED) .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .