Install the transmission mounting bracket

• Install transmission mounting bracket (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Transmission mounting bracket to transmission
  M10	tightening torque	48 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the ground strap (2).
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Ground strap on transmission/body
  M8	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING TRANSMISSION CROSS MEMBER .
• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .