Install the cover of the camber control arm

The installation location and direction of installation (1) must be noted.
Direction of installation (1):

The arrow on the cover points in the driving direction.

Installation location:
- L = left
- R = right
Courtesy of BMW OF NORTH AMERICA, INC.
Position cover (2) of the camber link on the camber link.
Replace nuts (1).
Parts: Nuts

Tighten nuts (1).

TIGHTENING TORQUE SPECIFICATION

Cover to camber control arm
M6 Replace nuts.	tightening torque	6 Nm

G14640872

Courtesy of BMW OF NORTH AMERICA, INC.