Install vibration absorber on the rear axle differential

Position the vibration absorber (1).
NOTE: The arrow on the vibration absorber (1) is pointing upwards. A deviation of maximum ±5° is permitted.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the screw (2).
Parts: Screw

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATION

Vibration absorber at rear axle
M10 Replace screw.	tightening torque	56 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.