Removing the dust plate
NOTE:
TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.
The work must be performed with vehicle care to prevent component damage.
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Removing the dust plate
- Release the dust plate (1) from the drive flange (3) in arrow direction with a hydraulic press (2) and the special tool 0 496 357 (31 5 272)
and remove.
Version B: Removing the dust plate
- Release and remove the small dust plate (1) and the large dust plate (2) from the drive flange (4) in arrow direction with a hydraulic press (3) and the special tool 0 496 357 (31 5 272)
.