Removing the instrument cluster

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Preliminary work

Refer to ADJUSTING THE STEERING COLUMN POSITION .
Refer to DEACTIVATING ELECTRICAL SYSTEM .
Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
Refer to REMOVING THE GAP COVER .

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Protect working area.
Handle tools and components carefully.

NOTE: RISK OF DAMAGE
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.

Protect surfaces from damage.

Unclip the cover (1) on the instrument cluster (2).
Loosen screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the screws (1) on the instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Fir the plastic adhesive tape (1) on to the decorative strip (2).
CONSUMABLE SPECIFICATION

Yellow plastic adhesive tape 83199410979

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Damage to the component.
Excessive force may damage the component.
- Handle component carefully.
Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload.
Slide the instrument cluster (1) manually upwards in arrow direction (B).

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Damage to the component.
Excessive force may damage the component.
- Handle component carefully.
Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload.
Slide the instrument cluster (1) manually upwards in arrow direction (B).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Feed the instrument cluster (1) upwards with the hook (2) out from the clamps (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Unlock plug connections (1) and disconnect.
Feed out the cable (2) from the holders (arrows).
Unclip all cable brackets (3).
Feed out and remove the instrument cluster (4).

Courtesy of BMW OF NORTH AMERICA, INC.