Install right band elimination circuit

• Correctly position the band elimination circuit (3) and tighten the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Band elimination circuit to C-pillar
  tightening torque	4.6 Nm

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING REAR TRIM PANEL .
• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .