Removing the blower for the heating and air-conditioning unit

Preliminary work 

• Refer to REMOVING RIGHT FOOTWELL TRIM .
• Refer to VEHICLES WITH AIRBAG MODULE: REMOVING KNEE AIRBAG .

• Unlock and disconnect the plug connection (1) from the blower motor (2).
• Loosen screws (3).
• Pull of the cable clip (4) from the housing of the blower motor (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).
• Guide out the hose (2) from the housing of the blower motor (3).
• Remove the housing of the blower motor (3).

Courtesy of BMW OF NORTH AMERICA, INC.