LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 105 Removing and installing/replacing rear lid lock (lower section of lock) >> Notes

51 24 105 Removing and installing/replacing rear lid lock (lower section of lock): Notes

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Installation: 

Mark position of lower section of rear lid lock on tail panel.

Release screws (1) on lower section of lock (2).

Fig 1: Releasing Screws On Lower Section Of Lock
G03124470Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) on actuator drive (2) and remove lower section of lock (3).

Fig 2: Disconnecting Plug Connection On Actuator Drive & Removing Lower Section Of Lock
G03124471Courtesy of BMW OF NORTH AMERICA, INC.